Tips for Uses

• Wood and More can be used at any consistency from liquid to paste.
• Wood and More has the ability to 'creep' easily into the end grain of wood and corners, nooks and crannies.
• On raw wood (old or new), it is recommended that you allow Wood and More to soak in for 1/2 to 1 hour, to see where a second coat may be necessary. Then just rub with a soft rag and enjoy the warm tone and patina.
• Old washclothes, t-shirts, sweatshirts, etc. make great rags to apply and rub off Wood and More.
• Applying with a brush is great for corners, edges, and hard to reach areas.
• Rubbing Wood and More on the bottom of drawers helps them glide in and out.
• Rubbed on the inside of wooden or metal lids makes them easier to open and close.
• Wood and More makes hinges and gears work more smoothly.
• Applicators can be stored in a reclosable bag. The more saturated the rag becomes, the more economical the Wood and More becomes.
• Reusable jars that when empty, just wash out and use for whatever you want.
• A light application helps in removing stuck on labels.
• Old tin and iron are greatly enhanced. Remove surface rust, apply Wood and More, and rub off.
• For painted surfaces always test on an out of sight area first.